STLZ-120A
Low speed semi-automatic feeding machine
| Host parameters | Low speed |
| Type | 120A |
| Frequency | 50HZ |
| Use voltage | 220V/AC |
| Motor power | 120W |
| Total power | 150W |
| Feeding distance | 5-12m |
| Feeding Area | 140㎡ |
| Box capacity | 80kg |
| Feeding amount | 300kg/h |
| Total weight | 21kg |
| Outline dimension cm | 56*56*83cm |
Details
Use instruction of controller:
Name:LCD semi-automatic controlling box (adopt for machine type: T120A,T150A,T150AS)
Instruction of function:
This style A series semi-automatic LCD controller has three kinds of function:Timing,Appointment,Often-on.At the same time has the function that no material stop within 3 minutes, simple and practical.
The way of use:
1. Timing function(regular feed time, it is time to stop):
Select “Timing” button,confirm feeding time,”HOUR” is hour,”Minute” is minute,push”O(jiān)N” then begin to work.
2. Appointment function(After pouring material then timing start to run,finish to feed then stop.)
Select “Appointment” button ,confirm how long time to start running,”Hour” is hour,”Minute” is minute,push”O(jiān)N” button then enter readiness,appointment time to start at once.
3. Often-on function(After pouring material push on ON then start to run,after finishing material then stop.
Select “Often-on”button ,push “ON“then begin to work,no material stop automatically within 3 minutes.
Notice：After every kind of function setting must push “ON” button ,than can work,if power off in halfway then on again , only “Often-on” function can continue to work.Other functions must push “ON”then can work.
Name:LCD semi-automatic controlling box (adopt for machine type: T120A,T150A,T150AS)
Instruction of function:
This style A series semi-automatic LCD controller has three kinds of function:Timing,Appointment,Often-on.At the same time has the function that no material stop within 3 minutes, simple and practical.
The way of use:
1. Timing function(regular feed time, it is time to stop):
Select “Timing” button,confirm feeding time,”HOUR” is hour,”Minute” is minute,push”O(jiān)N” then begin to work.
2. Appointment function(After pouring material then timing start to run,finish to feed then stop.)
Select “Appointment” button ,confirm how long time to start running,”Hour” is hour,”Minute” is minute,push”O(jiān)N” button then enter readiness,appointment time to start at once.
3. Often-on function(After pouring material push on ON then start to run,after finishing material then stop.
Select “Often-on”button ,push “ON“then begin to work,no material stop automatically within 3 minutes.
Notice：After every kind of function setting must push “ON” button ,than can work,if power off in halfway then on again , only “Often-on” function can continue to work.Other functions must push “ON”then can work.
